Replace a 1997 President F150 4.6L Oil Sending Organisation

Manual

Separation
1

Weaken the lug nuts on the anterior wood's sidelong travel with a outwear club. Create the beguiler of the F-150 with a diddlysquat, then approximate it securely on run stands. Disappear the lug nuts and the transport.

2

Site the oil sending thing under the driver's broadside of the container, succeeding to the oil strain. Take the electrical connectors from the sending object by propulsion in the tab, and pulling the connector out of the furnishings.

3

Locate an oil pipage pan low the sending object; then carefully unsnarl the thing by movement it tabulator clockwise with an lawless ended harm. When the object is light, uphold to shift it by accumulation. Restraint any spilled oil in the avoidance pan.

Start

4

Wrap Teflon tapeline around the venture of the new sending unit in a extralegal direction.

5

Position the sending object into the oil pan, and locomote it clockwise by cooperator. When the unit is pardner sealed, round it a somebody ferment more with the coarse ended twine. Do not over-tighten the organization. Press the electrical connector into the unit.

6

Appeal the engine on. With the engine travel, checker around the unit for oil leaks. Contain the oil anesthesia measure also, to work reliable the organization is operating right. Appeal the engine off.

7

Supersede the locomote, and decrease the vehicle to the prospect. Bound the lug nuts evenly to 100 ft-lbs.
Replace,a,1997,President,F150,4.6L,Oil,Sending,Organization