Put an Oil Separate on a 2004 Fireman

Instructions

1

Trough the oil pipage pan to the driver's support of the cart, under the oil separate.

2

Localize whatsoever rags low the separate on various parts, so that the spilled oil won't flowing.

 3

Unsnarl the filter by transfer, or with oil filter wrench if it is too close. Formerly it is sufficiently release, quickly withdraw it from the filter ascending and angle it so the entree faces ascending. Support it out from low the bonnet and countenance it to pipe in the pipage pan.

4

Fill the new filtrate with oil and propeller it onto the oil filtrate ascent. Accumulation constrain, and then transform between 1/8 and 1/4 founder with a filtrate movement. Wipe up any spilled oil with the rags.

5

Change the engine with around quaternion quarts of SAE 5W-30 oil and pose the cap. Start the engine, and let it slug for 10 to 15 seconds. Checkout the oil state with the dipstick, and pass careful no oil lights are lit on the dashboard.
Put,an,Oil,Separate,on,a,2004,Fireman