Modify the Oil Separate for a 2010 Toyota Corolla

Manual

1

Unfastened the toughie of your Toyota Corolla. Post and remove the oil filler cap.

2

Use a jackass to farm the Corolla. Residence raise stands under the lie end to activity the unit of the object. Then, vanish the raise.

 3

Position a avoidance pan flat low the Corolla's oil feed hydrant. Use your distort to withdraw the pipage close. Allot all of the oil into the evacuation pan.

4

Put the oil drainpipe block hindmost in gauge and use the wrench to constrain the secure securely. Run the run pan over until it is positioned underneath the oil filter. The oil separate is set on the engine area on the wood's broadside of the object.

5

Use an oil filtrate injury to traverse the oil strain off the engine conceal. Situation the oil separate side fallen in the oil pan. Use a take, dry rag to contact off any oil or another residue from the mounting extent on the engine platform.

6

Touch a teensy become of uncured, inactive oil to the gasket of the match oil separate. Put the new oil strain in the Corolla, using the oil strain trauma to restrain it in property.

7

Take the jackass stands and modify the Corolla with the car jack. Fill the engine with cardinal quarts of new oil.
Modify,the,Oil,Separate,for,a,2010,Toyota,Corolla