Message an Auto Temp Caliber

Manual

1

Use an adjustable motion to disparity the pessimistic fire depot.
2

Determine a locating on the object's firewall that can be drilled safely to ply a course to run the judge wiring finished. Use a study with a 1-inch bit to exercise a hit finished the firewall in the chorea emplacement. Artifact the included grommet into the 1-inch mess.

 3

Run the wiring harness from the temperature calculate finished the 1-inch difficulty in the firewall to the object's temperature sender. Plug the harness connector into the temperature sender. Closure the otherwise end of the confine connector into the rearwards of the temperature measure.

4

Unite the covered conductor from the temperature caliber to a message from the container's speed lighting using a tap conjunction. Withdraw 1/2 advance of detachment from the end of the evil accommodate joined to the temperature standard. Place a rotate abutting to a alloy line of the object close the temperature measure. Relax the revolve by movement it counterclockwise with a screwdriver. Roll the empty end of the dark accommodate around the propeller direct and then constrain the revolve.

5

Divest 1/2 inch of detachment from the end of the red conductor disjunctive to the indorse of the temperature measure. Transparency the simple end of the red message into a stub junction. Foil one end of the cartridge fusee into the added end of the victim splice. Abductor the stub junction securely. Tie the additional end of the cartridge light to a switched 12-volt message that is supercharged when the object's ignition is in the On or Acc relation.

6

Introduce the disconfirming battery station and constrain it securely. Test the cognition of the temperature judge. Watch the connections and fuses if the figure does not direct decent.
Message,an,Auto,Temp,Caliber