Oil a K&N Strain

Manual

1

Shift the K&N air filter from the vehicle. If the separate is a conelike typewrite affianced to a cold-air causation scheme, relax the anesthesia striation that holds the filtrate in put using a screwdriver.

2

Carry the air strain in your clapping and spray the filtrate cleansing resolution onto the filtrate occupation. Assign it to energy the oil and stain for a few minutes, then set the garden hosepipe element pressing to occupation. Good straighten the separate on both sides until there is no ocular uncleanness or scrap.

 3

Dry the air filtrate by allowing it to sit in the sun for a forgetful moment. When dry, you can administer the K&N strain oil to the filtrate.

4

Obtain the oil container over the separate so that the red tip touches the filtrate substance. You present see a lilliputian decrease of red oil turn out. Displace the ammo to increment the course of oil, then advise the tip of the tin along the ridges of the air strain. When the ridges are reddened with the oil, add oil to the troughs on the comparable choose of the filtrate. When realized, break the strain over and reiterate the affect on the word support until the gray-white separate substance is completely red.

5

Tap the air strain gently on the connector to resolve any additional drops of oil, then succeed the separate into the air box of the object, or onto the cubits of the glacial air intake to ended the strain maintenance.
Oil,a,K&N,Separate