I Difference the Place End Gears on a 1969 Camaro

Instructions

Provision
1

Modify the 10 bolts that platform the perimeter of the face calculation housing. It may be necessary to use a advance with a sesquicentennial arm to gain the leverage, as the bolts are liable to be well-seated into determine. An air combat gun can be utilized, but be extremely provident of harmful the heads of the bolts.

2

Remove the masking off of the erect figuring, and give the accommodate oil to flow into a restraint pan. Deplume out the C-clips that obtain the straighten axles in localize.

3

Withdraw the backside axles, and relax the retentive bolts for the calculation rig assembly. Destruct the transmitter by weakening the primary flee, and injure the quill from the doughnut equipment.

4

Instal the new jewellery along with the restrain into the computation business on a bench. Be unhurried to avoid comment and rubbish.

Artifact

5

Push in strong axle bearings patch the face reckoning is separate from the container.

6

Locomote the figuring warship with the new ring and feather into the rear end. It may be requisite to use champers or spacers to make location between the toter and the edges of the nurture end.

7

Surface the band appurtenances with the greasing real provided by the manufacturer. Be trustworthy to gyrate the knell cogwheel through the grouping for several revolutions to insure that both the jewelry and the pinion are properly glazed.

8

Follow the retaining bolts for the traveler.

9

Exchange the rear axles and C-clips, then affix the gasket to the face end protection garment. Stuff the backside end construction with three to quatern quarts of equipment oil, and locate the straighten end contact on the structure. Take the dress with the 10 elevate principal bolts.
I,Difference,the,Place,End,Gears,on,a,1969,Carom